Why do quotes for the same shower vary so much?

Quotes differ in glass thickness, glass type (clear vs. low-iron), hardware quality and finish, coatings, and whether removal of the old door and site prep are included. Compare line by line, not just the total.

Can I put a frameless glass door on a bathtub?

Yes. Fixed frameless tub screens and hinged or sliding frameless tub enclosures are common. The final design depends on the tub ledge and wall layout.

Shower Doors

Frameless Shower Door Cost in Miami (2026): What You’ll Actually Pay

Real 2026 price ranges for framed, semi-frameless and frameless shower doors — plus the 7 factors that move your quote up or down in South Florida.

EGEastern Glass CorpCustom glass since 2010Updated September 16, 20264 min read

Key takeaways

Nationally, installed frameless shower doors typically run $600–$1,900, semi-frameless $500–$1,550 and framed $400–$1,100 (HomeGuide, 2026).
Angi reports most homeowners spend $1,000–$2,500 on a frameless shower door, with an average around $1,400.
Size, number of panels, glass thickness and hardware finish drive most of the price — walk-in and floor-to-ceiling enclosures cost more.
Site prep such as wall reinforcement or waterproofing fixes can add $50–$500.
An on-site measurement is the only way to get an exact number: walls are rarely perfectly plumb.

Please note: Prices shown are published national and regional estimates for planning purposes only and are not a quote from Eastern Glass Corp. Your price depends on your measurements and selections.

On this page

01Shower door cost by type
027 factors that move your price up or down
03Why South Florida projects often land higher
04Is a frameless shower door worth the extra cost?
05Safety: what the code requires
06How to get an accurate quote
07Frequently asked questions

A frameless glass shower is one of the upgrades that changes a bathroom the most — and one of the most searched prices in any remodel. The problem: online numbers range from a few hundred dollars to several thousand. This guide breaks down what the published 2026 data actually says, why South Florida projects often land on the higher side, and how to get a quote you can trust.

$600–$1,900

Typical installed frameless door (national, HomeGuide)

~$1,400

Average frameless shower door spend (Angi)

1–2 days

Typical Eastern Glass install time after measuring

Shower door cost by type

The type of door is the single biggest price driver. Framed doors use thinner glass held by a metal frame; frameless doors use thick tempered glass held only by hinges and clamps.

Door type	Typical installed cost	Glass thickness	Best for
Framed	$400 – $1,100	Thinner glass (often 1/4")	Tight budgets, rentals
Semi-frameless	$500 – $1,550	5/16" – 3/8"	Modern look at a mid-range price
Frameless	$600 – $1,900+	3/8" – 1/2"	Clean, open, high-end bathrooms

National installed price ranges reported by HomeGuide (2026). Large custom enclosures can exceed these ranges.

7 factors that move your price up or down

1Size and number of panels. A single door on a standard alcove costs far less than a door + panel + return, or a 90° corner unit.
2Glass thickness. 3/8" is the industry standard for frameless. 1/2" glass looks more substantial but is heavier, so it needs heavier-duty hinges and solid wall backing.
3Configuration. Hinged, sliding, pivot, neo-angle and steam showers (which need a transom and sealed top) each price differently.
4Glass type. Clear glass is standard. Low-iron (“ultra-clear”) glass removes the green tint on the edges and costs more; frosted or patterned glass also adds cost.
5Hardware finish. Chrome and brushed nickel are typical; matte black, brushed gold and specialty finishes usually cost more.
6Protective coating. A factory or applied hydrophobic coating helps water and minerals bead off — very useful with South Florida’s hard water.
7Site conditions. Out-of-plumb walls, missing blocking or waterproofing issues can add roughly $50–$500 in prep work, according to Angi.

Why online calculators miss the mark

Frameless panels are cut to fit your exact opening. Tile walls are rarely perfectly plumb or square, so a professional measures after the tile is finished and orders glass to those dimensions. That measurement is what turns a price range into a real quote.

Walk-in frameless glass shower with clamps and fixed panels in a Miami bathroom — Walk-in and floor-to-ceiling enclosures use more glass and hardware — and cost more than a single alcove door.

Why South Florida projects often land higher

Bigger showers. Many newer and remodeled homes in Miami-Dade, Broward and Palm Beach feature walk-in showers with multiple fixed panels.
Floor-to-ceiling and steam designs. Taller glass means larger, heavier panels and more hardware.
Hard water. Many homeowners add a protective coating to reduce mineral spots and cleaning time.
Condo logistics. Some associations require a certificate of insurance, scheduled elevator access or specific work hours — plan for it early.

Is a frameless shower door worth the extra cost?

Why homeowners choose frameless

No metal tracks or frames where soap scum and mildew build up
Makes the bathroom look larger and brighter
Thick tempered glass feels solid and premium
Showcases tile work instead of hiding it

What to keep in mind

Higher upfront cost than framed doors
Requires precise measuring and solid wall anchoring
Small gaps and seals must be planned for water control
Heavier 1/2" glass needs stronger hinges

Safety: what the code requires

The International Residential Code — the model for Florida’s residential building code — treats glass in shower and tub enclosures as a hazardous location when its bottom edge is less than 60 inches above the standing surface. In practice, that means shower glass must be safety glazing, and safety glazing must carry a permanent identification mark. Always look for that small etched logo in the corner of the glass.

How to get an accurate quote

Questions to ask any shower door installer

Is the glass tempered safety glass with a permanent mark?
What thickness (3/8" or 1/2") and what glass type (clear or low-iron)?
Which hardware finish is included, and is it solid brass or stainless?
Does the price include removal and disposal of the old door?
Is a protective coating included or optional?
How long from measurement to installation?
What warranty covers the glass, hardware and installation — in writing?

Want to compare styles before you decide? Read our guide on frameless vs. semi-frameless shower doors.

Frequently asked questions

At Eastern Glass, most shower door installations are completed within 1–2 days once measurements are taken. From consultation to final installation, the full process typically takes about 5–7 business days.